Sunday, 9 June 2019

My First Journal Published

My first journal paper was published as a part of my Engineering project.
that is "DESIGN AND FABRICATION OF AUTOMATIC PAPER CUTTING MACHINE" in the Journal of Emerging Technologies and Innovative Research. I am happy and here is the information about that journal. It is the open access journal you can follow the link.

Cite This Article

"DESIGN AND FABRICATION OF AUTOMATIC PAPER CUTTING MACHINE", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 5, page no. pp269-274, May-2019, Available at : http://www.jetir.org/papers/JETIRBT06038.pdf

Publication Details

Published Paper ID: JETIRBT06038
Registration ID: 210767
Published In: Volume 6 | Issue 5 | Year May-2019
DOI (Digital Object Identifier):
Page No: 269-274
ISSN Number: 2349-5162
at No comments:
Labels:
Location: Abburu, Andhra Pradesh 522403, India
Subscribe to: Posts (Atom)

About the author

Hi ! Everyone. This is Venkata Surya Mohan Krishna DME., B TECH.,                                          This blog consists of my th...

  • Cams
    Introduction: A cam is a rotating machine element which gives reciprocating or oscillating motion to another element known as follower...
  • My First Journal Published
    My first journal paper was published as a part of my Engineering project. that is  "DESIGN AND FABRICATION OF AUTOMATIC PAPER CUTT...
  • Pelton wheel
    Introduction: The Pelton wheel is an impulse type water turbine. It was invented by Lester Allan Pelton in the 1870s. The Pelton wheel ...